Araştırma Makalesi
BibTex RIS Kaynak Göster

Analysis of gas breakdown and electrostatic simulation characteristics of a Spherical Inertial Electrostatic Confinement Fusion Chamber (SIEC-K)

Yıl 2020, , 9 - 15, 25.06.2021
https://doi.org/10.1501/nuclear.2023.53

Öz

In this study, a spherical inertial electrostatic fusion reactor (SIEC-K) is designed, built and operated to analyze electrostatic characteristics and plasma breakdown conditions. The reactor consists of two spherical electrodes; where the anode is the outer chamber of the reactor made out of two aluminum hemispheres and the cathode is a combination of stainless-steel wires forming a cage like structure aligned within the center. Design considerations and processes are introduced as the execution of this technology sustains the fundamental grounds to understanding plasma breakdown. The conditions for plasma breakdown are that under a low-pressure environment where a certain potential difference is created between two electrodes, a deep potential well will be formed within the cathode region. The gas present in the reactor chamber will be ionized and the nucleus of the atoms will be accelerated towards the negative potential well, creating plasma breakdown. Considering that this study will not focus on nuclear fusion reactions, the main fuel source is chosen to be air and it is also very convenient to operate with. Electrostatic simulation was made to estimate the plasma region inside of the reactor and check if the proposed design is in accordance with the literature, which is to validate the formation of the potential well within the structure of the cathode. Pressure-voltage values within the range of hardware limitations (1-6 kV) for plasma breakdown values are recorded and qualitatively compared to their corresponding values for linear Paschen’s plasma breakdown voltage law. The main motivation behind this study is to uncover the basis of plasma characteristics of the SIEC-K Reactor for future studies.

Destekleyen Kurum

Ankara University Institute of Nuclear Sciences

Kaynakça

  • Gamal M El-Aragi. “Building Inertial Electrostatic Confinement Fusion Device Aimed for a Small Neutron Source”. High Energy Physics 4(6) (2017), pp. 88–92.
  • Gamal M Elaragi. “Operation of Inertial Electrostatic Confinement Fusion (IECF) Device Using Different Gases”. Journal of Fusion Energy 37(1) (2018), pp. 37–44.
  • Ates Fettahoglu. How does pressure effect the plasma breakdown voltage of air as a fuel source in the designed IEC fusion reactor? Ankara, Mar. 2019. URL: http://tedprints.tedankara.k12.tr/939/.
  • M Ghasemi, M Habibi, and R Amrollahi. “Prediction of potential well structure formed in spherical inertial electrostatic confinement fusion devices with various parameters”. Journal of Plasma Physics 79(3) (2013), p. 295.
  • E. C. G. Hermans. The design and optimization of an inertial electrostatic confinement fusion device — Eindhoven University of Technology research portal. Feb. 2013.
  • S. H. M. Limpt. Characterization of fusor jets. 2013.
  • Prijil Mathew et al. “Experimental verification of modified Paschen’s law in DC glow discharge argon plasma”. AIP Advances 9(2) (2019), p. 025215.
  • George H Miley and S Krupakar Murali. “Inertial electrostatic confinement (IEC) fusion”. Fundamentals and Applications (2014).
  • Matthew Smith. “Confining plasma in a spherically-convergent electrostatic potential well: the Farnsworth-Hirsch fusor” (2005).
  • E. B. Sozer. Gaseous Discharges and Their Applications as High Power Plasma Switches. 2008.
  • Krupakar Murali Subramanian. Diagnostic study of steady state advanced fuel (deuterium-deuterium and deuterium-tritium) fusion in an IEC device. The University of Wisconsin-Madison, 2004.
  • Erik Wagenaars. Plasma Breakdown of Low-Pressure Gas Discharges. 2006. DOI: 10.6100/IR614696.
Yıl 2020, , 9 - 15, 25.06.2021
https://doi.org/10.1501/nuclear.2023.53

Öz

Kaynakça

  • Gamal M El-Aragi. “Building Inertial Electrostatic Confinement Fusion Device Aimed for a Small Neutron Source”. High Energy Physics 4(6) (2017), pp. 88–92.
  • Gamal M Elaragi. “Operation of Inertial Electrostatic Confinement Fusion (IECF) Device Using Different Gases”. Journal of Fusion Energy 37(1) (2018), pp. 37–44.
  • Ates Fettahoglu. How does pressure effect the plasma breakdown voltage of air as a fuel source in the designed IEC fusion reactor? Ankara, Mar. 2019. URL: http://tedprints.tedankara.k12.tr/939/.
  • M Ghasemi, M Habibi, and R Amrollahi. “Prediction of potential well structure formed in spherical inertial electrostatic confinement fusion devices with various parameters”. Journal of Plasma Physics 79(3) (2013), p. 295.
  • E. C. G. Hermans. The design and optimization of an inertial electrostatic confinement fusion device — Eindhoven University of Technology research portal. Feb. 2013.
  • S. H. M. Limpt. Characterization of fusor jets. 2013.
  • Prijil Mathew et al. “Experimental verification of modified Paschen’s law in DC glow discharge argon plasma”. AIP Advances 9(2) (2019), p. 025215.
  • George H Miley and S Krupakar Murali. “Inertial electrostatic confinement (IEC) fusion”. Fundamentals and Applications (2014).
  • Matthew Smith. “Confining plasma in a spherically-convergent electrostatic potential well: the Farnsworth-Hirsch fusor” (2005).
  • E. B. Sozer. Gaseous Discharges and Their Applications as High Power Plasma Switches. 2008.
  • Krupakar Murali Subramanian. Diagnostic study of steady state advanced fuel (deuterium-deuterium and deuterium-tritium) fusion in an IEC device. The University of Wisconsin-Madison, 2004.
  • Erik Wagenaars. Plasma Breakdown of Low-Pressure Gas Discharges. 2006. DOI: 10.6100/IR614696.
Toplam 12 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Articles
Yazarlar

Ateş Fettahoğlu 0000-0003-1652-4469

Yayımlanma Tarihi 25 Haziran 2021
Gönderilme Tarihi 21 Aralık 2020
Yayımlandığı Sayı Yıl 2020

Kaynak Göster

APA Fettahoğlu, A. (2021). Analysis of gas breakdown and electrostatic simulation characteristics of a Spherical Inertial Electrostatic Confinement Fusion Chamber (SIEC-K). Journal of Nuclear Sciences, 7(1), 9-15. https://doi.org/10.1501/nuclear.2023.53
AMA Fettahoğlu A. Analysis of gas breakdown and electrostatic simulation characteristics of a Spherical Inertial Electrostatic Confinement Fusion Chamber (SIEC-K). Journal of Nuclear Sciences. Haziran 2021;7(1):9-15. doi:10.1501/nuclear.2023.53
Chicago Fettahoğlu, Ateş. “Analysis of Gas Breakdown and Electrostatic Simulation Characteristics of a Spherical Inertial Electrostatic Confinement Fusion Chamber (SIEC-K)”. Journal of Nuclear Sciences 7, sy. 1 (Haziran 2021): 9-15. https://doi.org/10.1501/nuclear.2023.53.
EndNote Fettahoğlu A (01 Haziran 2021) Analysis of gas breakdown and electrostatic simulation characteristics of a Spherical Inertial Electrostatic Confinement Fusion Chamber (SIEC-K). Journal of Nuclear Sciences 7 1 9–15.
IEEE A. Fettahoğlu, “Analysis of gas breakdown and electrostatic simulation characteristics of a Spherical Inertial Electrostatic Confinement Fusion Chamber (SIEC-K)”, Journal of Nuclear Sciences, c. 7, sy. 1, ss. 9–15, 2021, doi: 10.1501/nuclear.2023.53.
ISNAD Fettahoğlu, Ateş. “Analysis of Gas Breakdown and Electrostatic Simulation Characteristics of a Spherical Inertial Electrostatic Confinement Fusion Chamber (SIEC-K)”. Journal of Nuclear Sciences 7/1 (Haziran 2021), 9-15. https://doi.org/10.1501/nuclear.2023.53.
JAMA Fettahoğlu A. Analysis of gas breakdown and electrostatic simulation characteristics of a Spherical Inertial Electrostatic Confinement Fusion Chamber (SIEC-K). Journal of Nuclear Sciences. 2021;7:9–15.
MLA Fettahoğlu, Ateş. “Analysis of Gas Breakdown and Electrostatic Simulation Characteristics of a Spherical Inertial Electrostatic Confinement Fusion Chamber (SIEC-K)”. Journal of Nuclear Sciences, c. 7, sy. 1, 2021, ss. 9-15, doi:10.1501/nuclear.2023.53.
Vancouver Fettahoğlu A. Analysis of gas breakdown and electrostatic simulation characteristics of a Spherical Inertial Electrostatic Confinement Fusion Chamber (SIEC-K). Journal of Nuclear Sciences. 2021;7(1):9-15.