In this study, a manganese dioxide (MnO2/polyaniline (PANI)/ single-walled carbon nanotube (SWCNT) nanocomposite electrode was prepared for pseudo-supercapacitors. To reduce the internal resistance of the electrode, increase the capacitance stability, and reduce the cost of single-walled carbon nanotubes, SWCNT was subjected to two-step acid etching. The purity of SWCNT was improved from ~95% to 99.98%. In addition, SWCNT was functionalized by this process. Thus, a nanocomposite was formed by coating PANI around SWCNT. MnO2/PANI/SWCNT were synthesized using the hydrothermal method. Morphological, chemical and thermal analyses of the synthesized nanocomposite structure were carried out. In addition, X-ray diffraction (XRD) was used to determine the crystal structure. Electrochemical analyses were performed using a three-electrode system in a 1 M KOH electrolyte solution. Cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) measurements were performed. The capacitance of the nanocomposite electrode at 400 cycles was
314 mF/cm2, and the capacitance retention stability was calculated at 73.24%. The results showed that the capacitance stability was high, and the supercapacitor was sensitive to redox reactions.
FOA-2021-681 ve TÜBİTAK 1002-B 122M934
Bu makale çalışmasında psedo-süperkapasitörler için mangan dioksit (MnO2)/ polianilin (PANI)/ tek duvarlı karbon nanotüp (SWCNT) nanokompozit elektrot hazırlanmıştır. Elektrotun iç direcini azaltmak, kapasitans stabilitesini arttırmak ve tek duvarlı karbon nanotüp maliyetini azaltmak için SWCNT iki aşamalı asitle aşındırma çalışması yapılmıştır. SWCNT ~%95 saflıktan %99,98 saflığa ulaştırılmıştır. Ayrıca bu işlemle SWCNT fonksiyonelleştirilmiştir. Böylece SWCNT çevresine PANI kaplanarak nanokompozit oluşturulmuştur. Hidrotermal yöntem ile MnO2/PANI/SWCNT sentezlenmiştir. Sentezlenen nanokompozit yapının morfojik, kimyasal ve termal analizleri gerçekleştirilmiştir. Bununla birlikte kristal yapı tayini için X ışını difraksiyometresi (XRD) kullanılmıştır. Elektrokimyasal analizler üçlü elektrot sistemiyle 1 M KOH elektrolit çözeltisinde yapılmıştır. Döngüsel voltametri (CV), galvanostatik şarj-deşarj (GCD) ölçümleri alınmıştır. Nanokompozit elektrodun 400 döngüde kapasitansı 314 mF/cm2 olarak bulunmuş kapasite tutma kararlılığı ise %73,24 olarak hesaplanmıştır. Yapılan çalışma sonucunda kapasitans kararlılığının yüksek olduğu ve süperkapasitörün redoks tepkimelerine duyarlı olduğu gözlemlenmiştir.
Bursa Uludağ Üniversitesi ve TÜBİTAK
FOA-2021-681 ve TÜBİTAK 1002-B 122M934
Bu makale çalışmasında Bursa Uludağ Üniversitesi BAP Birimi FOA-2021-681 proje koduyla ve TÜBİTAK 1002-B 122M934 proje koduyla desteklenmiştir. Ayrıca yazarlardan Çağatay ÖZADA, YÖK 100/2000 Doktora burs ve TÜBİTAK 2211/C Doktora burs programları tarafından desteklenmektedir. Yazarlardan Merve ÜNAL YÖK 100/2000 doktora burs programı tarafından desteklenmiştir.
Primary Language | English |
---|---|
Subjects | Energy Systems Engineering (Other), Polymer Science and Technologies, Composite and Hybrid Materials |
Journal Section | Research Articles |
Authors | |
Project Number | FOA-2021-681 ve TÜBİTAK 1002-B 122M934 |
Early Pub Date | December 2, 2023 |
Publication Date | December 27, 2023 |
Submission Date | May 1, 2023 |
Acceptance Date | September 25, 2023 |
Published in Issue | Year 2023 Volume: 28 Issue: 3 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.