It
is essential to remove the sizing agents (desizing) prior to coloration for
woven textile materials. Although desizing is a common pre-treatment practice,
environmental load of the process effluent is usually high. Therefore, new
approaches are required in order reduce the environmental impact. Ozone
treatment is a novel subject for textile finishing. In this study, ozone gas
was utilised for desizing purpose. Various ozone treatment periods (15-30 min)
were applied for desizing. Also conventional enzymatic desizing was applied as
the control treatment. Desizing degree, whiteness, mote count, strength and
chemical oxygen demand (COD) tests were applied. The results were evaluated by
the graphics and the statistical data analysis method ANOVA. Desizing rate
increased as the ozone treatment time increased. Also the mote count
considerably decreased by the ozone treatment. Moreover, the COD values of the
ozone process were less compared to conventional enzymatic treatment. Therefore
it was concluded that ozone treatment can be considered as an environmentally
friendly alternative in order to other chemical pre-treatment processes like
desizing, hydrophilization, bleaching.
Boya ve
baskı işlemlerinden önce, kumaş üzerindeki haşılın sökülmesi gereklidir. Haşıl
sökme, pamuklu kumaşlara uygulanan bir yaş ön terbiye işlemidir. Bu tür yaş ön
terbiye işlemlerinin pek çoğu doğaya zarar veren endüstriyel işlemlerdir. Bu sebeple,
bu tür yaş işlemlerde çevreye duyarlı, uygun maliyetli yeni stratejilere
ihtiyaç duyulmaktadır. Ozonlama işlemi de, tekstil terbiyesinde yeni bir metot
olarak yerini almaktadır. Bu çalışmanın amacı; ozon gazı kullanılarak, mevcut
haşıl sökme prosesine alternatif bir yöntem göstermektir. Çalışmada, farklı
ozonlama sürelerinde (15-30 dakika.) haşıl sökme işlemi gerçekleştirilmiştir. Ozonlanmış
numunelere sıcak ve soğuk yıkama ard işlemleri yapılmıştır. Daha sonra ozon
gazı ile yapılan haşıl sökmenin değerlendirilebilmesi için, standart haşıl
sökme işlemi de (amilaz ile) çalışmaya katılmıştır. Çalışmanın sonunda haşıl
sökme derecesi, beyazlık, bitçik sayısı, kopma mukavemeti ve KOİ (Kimyasal
Oksijen İhtiyacı) değerleri test edilmiştir. Sonuçlar grafiklerle ve ANOVA
istatistiki veri çözümleme metodu ile değerlendirilmiştir. Ozon uygulama süresi
arttıkça haşıl sökme oranı da artmış, 30 dakika ozonlama-sıcak yıkama ard işlemi
yapılmış uygulamanın haşıl sökme değerlerinin konvansiyonel haşıl sökme
yöntemine yakın değerlerde olduğu, bitçik sayısının da anlamlı bir şekilde
azaldığı görülmüştür. Ozon uygulama atıklarının, standart haşıl sökme banyo
atıklarına göre çok daha düşük KOİ değerlerine sahip olduğu aşikardır. Bu durum
da çevresel farkındalık açısından çok önemlidir. Sonuçta, ozonlamanın haşıl
sökmeye alternatif bir metot olabileceği ve metodun geliştirilmesi ile haşıl
sökme, hidrofilleştirme ve ağartma gibi ön terbiye işlemlerinden tasarruf
sağlanacağı düşünülmektedir.
Subjects | Engineering |
---|---|
Journal Section | Research Articles |
Authors | |
Publication Date | April 27, 2017 |
Submission Date | December 29, 2016 |
Acceptance Date | March 17, 2017 |
Published in Issue | Year 2017 Volume: 22 Issue: 1 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.